How to pair AfterShokz (in 2022)

Do you wish to learn how to pair Aftershokz? If so, you’ve come to the perfect place because we’ll walk you through it.

The mashup of AfterShokz is simple, as it should be. AfterShokz headphones can be easily paired with new devices or switched between devices. With quick and easy pairing, you can enjoy your open-ear bone conduction listening experience faster.

Table of Contents

Aftershokz

AfterShokz has been renamed Shokz because it is “a shorter, more impactful word that is simpler to remember and share, helping to spread the word and give more sports fans the benefits of open-ear listening.”

Instead, the Aeropex uses transducers the size of your fingertip to transmit sound through your cheekbones. When music is played, the transducers vibrate similarly to the driver in an earbud, but instead of going directly to your eardrum, the vibration passes through your skin and bones.


How to pair AfterShokz?

The pairing of AfterShokz is straightforward, as it should be. AfterShokz headphones can be paired with new devices or switched across devices. With quick and easy pairing, you can enjoy your open-ear bone conduction listening experience faster.

Beginning AfterShokz Pairing

AfterShokz headphones and headsets will pair with most Bluetooth 3.1 or higher devices, including phones, tablets, computers, and watches. Some transmitters will not pair with them. A Smart TV with Bluetooth v3.1 or up is required to pair AfterShokz headphones with a Smart TV. If your TV lacks Bluetooth, you will need a Bluetooth transmitter.

How to pair Bluetooth with Aftershokz.

Bluetooth with Aftershokz.

Begin by turning off your aftershokz. Press the volume+ button for 5-7 seconds to enter pairing mode. When the LED light flashes red and blue and the voice prompter Audrey says “pairing,” you’re in pairing mode.

Once in pairing mode, go to your device’s Bluetooth settings and select your headphones from the list of options.

How to Connect AfterShokz to the iPhone?

How to connect aftershokz to iPhone

Begin by turning off your headphones. Press the volume+ button for 5-7 seconds to enter pairing mode. “Welcome to AfterShokz,” Audrey will say. Once the LED light blinks red and blue, press the power button.

Navigate to the Bluetooth Settings menu and select your headphones. Audrey will respond, “Connected.” Your iPhone’s headphones should now be connected.

How to Connect AfterShokz to Android?

Begin by taking your headphones off. Press and hold volume+ until Audrey says “pairing,” The LED indicator flashes red and blue to enter pairing mode. Select your headphones from the Bluetooth menu on your device. ” Audrey will say “connected,” and the LED indicator will briefly flash blue.

How to Use NFC with AfterShokz OpenComm Headsets?

How to Use NFC with AfterShokz OpenComm Headsets

Near Field Communication connects a mobile device and an NFC-enabled headset simply by being near one another. This method eliminates the need to manually sync both devices by accessing the Bluetooth menu on the phone. Currently, our OpenComm bone conduction headset is the only AfterShokz wireless model with the NFC Pairing feature.

Hold the Volume+ button until the AfterShokz OpenComm headset flashes red and blue to indicate pairing mode. Put the NFC symbol, which can be found on the left arm of the headset, close to the Android device’s NFC detection region. When your headset is successfully paired, a blue light will flash once, and Audrey will say “connected.” You might also have to check the connection on the device you’re connecting to.

How do I connect AfterShokz to more than one device?

AfterShokz headphones support multipoint pairing, allowing users to connect to two devices simultaneously. While you will not be able to hear audio from both devices simultaneously, you will be able to switch between them easily.

To pair multiple devices using multipoint pairing, follow these steps:

  • Begin by turning off your headphones.
  • To enter pairing mode, hold the volume+ button for 5-7 seconds or until the LED light flashes red and blue.
  • Hold down the multifunction and volume+ buttons for 2-3 seconds. “Multipoint Enabled,” Audrey says.
  • Connect to the first device. “Connected,” Audrey says.
  • Remove your headphones.
  • To return to pairing mode, hold down the volume+ button for 5-7 seconds or until the LED light alternates between red and blue flashes.
  • Connect to the second device. “Device two is connected,” Audrey says.
  • Turn your headphones off.
  • These devices should now be paired with your headphones.

Aftershokz Features

  • The fit is both comfortable and secure.
  • Physical buttons have been improved.
  • IP67 water and dust resistance.
  • The battery life is 8 hours.
  • Keep your ears open for safety.

Frequently Asked Questions (QnA)

How come my AfterShokz isn’t pairing?

All your headphones require is a reset. 1) Begin by unplugging your headphones and removing them from your devices.2) Press the volume+ button for 5 to 7 seconds to activate pairing mode. The button will turn on your headset, and the LED light will flash red and blue.

Can I use AfterShokz on two devices?

Shokz headphones feature multipoint pairing, which allows users to connect to two devices at the same time. While you won’t be able to hear audio from both devices simultaneously, you will be able to switch between them.

How do I connect my Aeropex?

Press and hold volume+ for 5-7 seconds to enter pairing mode. “Welcome to AfterShokz,” Audrey will say. Hold volume plus down until the LED light flashes red and blue. Select “Aeropex” in the Bluetooth settings on your device. Audrey will respond, “Connected.” Your device’s headphones should now be connected.


Conclusion:

Leave a Comment